Offices
- Dead outlets at desks and workstations
- Breakers tripped by space heaters, printers and break-room appliances
- Ceiling lights that flicker or go dark
Durham Commercial Electrical Repairs That Get Your Business Back to Work
Breakers tripping, outlets dead or lights out at your business? Brian Electric LLC finds the cause and fixes it for offices, shops and restaurants in Durham and the Triangle. You get the price before we start.
- Licensed in North Carolina
- Emergency line open 24/7
- Free estimates
What We Fix
Electrical Problems We Fix at Businesses
When something electrical fails at work, it costs you time and sales. These are the problems business owners in Durham call us about most, and what usually causes them.
Price firstYou approve the repair before we start
Breakers That Keep Tripping
A breaker that trips again and again is protecting a circuit with a problem. Too much equipment may be on it, or there may be a short or a worn breaker.
Often caused byOverloaded circuit, short or worn breaker
Outlets That Stopped Working
A row of dead outlets can stop a workstation, a register or a display. We trace the circuit back to where the power stops.
Often caused byTripped GFCI, loose wire or failed outlet
Lights That Flicker or Go Dark
Flickering or dead lights are hard on staff and customers. We check the fixture, the switch and the circuit to find which one is failing.
Often caused byFailing fixture, loose connection or bad switch
Equipment That Keeps Losing Power
Coolers, ovens, printers and other equipment need steady power. If one keeps shutting off, the circuit may be too small or shared with other loads.
Often caused byUndersized or shared circuit
When to Call Right Away
These signs can mean a fire risk. Keep people away from the area and call us. Our emergency line is open 24/7, and we are usually on site in 40 to 50 minutes.
Call (984) 271-2113- A burning smell or smoke near an outlet, panel or fixture
- Sparks or crackling from an outlet, switch or panel
- An outlet, switch or panel cover that feels hot
- Water near outlets, panels or equipment
- Power lost to the whole building while your neighbors still have it
If there is fire or heavy smoke, leave the building and call 911 first.
Be Ready
What to Do Before We Arrive
For a repair that is not an emergency, a few simple steps keep your space safe and help us find the problem faster.
Note What Stopped
Write down what lost power, when it started and what was running at the time.
Leave a Tripping Breaker Off
If a breaker trips again right after you reset it, leave it off and tell us. Resetting it over and over can make things worse.
Turn Off Equipment on That Circuit
Switch off or unplug equipment on the dead circuit if you can do it safely. It protects the equipment when power comes back.
Clear a Path to the Panel
Move boxes, carts or stock away from the electrical panel so we can get to it quickly.
Find the Panel Labels
If your panel has a directory or labeled breakers, keep it handy. It helps us find the right circuit faster.
Tell Your Staff
Let staff know which outlets, lights or machines not to use until the repair is done.
Please do not open the panel cover, touch damaged wiring or try to fix it yourself. Leave that part to us.
How It Works
How We Find and Fix the Problem
Resetting a breaker or swapping a part can hide a problem for a day. We look for the reason it failed, so it does not come back.
Tell Us What Happened
When it started, what stopped working and what else was running at the time.
Test the Circuits
We test the panel, breakers, wiring and devices on the circuit to find the real cause.
Explain and Price
You hear what failed, why it failed and what the repair costs before we start.
Make the Repair
We fix the cause, not just the symptom, and keep the rest of your space running where we can.
Test Again
We test the circuit under normal use, so you know the fix will hold.
Fix the cause, not just the symptom
A repair that holds keeps your business running. On every repair job:
- We find the cause before we fix anything
- You approve the price before work starts
- We test the repair before we leave
Quick Guide
Why Commercial Breakers Trip
A tripping breaker is a warning, not the problem itself. Here are the four most common causes, how each one shows up and how we fix it.
CauseWhat you noticeHow we fix it
Overloaded Circuit
What you noticeTrips when several machines or heaters run at the same time, then resets fine later.
How we fix itMove some equipment to another circuit or add a dedicated circuit.
Short Circuit
What you noticeTrips the moment you reset it. You may hear a pop or see scorch marks on an outlet.
How we fix itFind and repair the damaged wire, outlet or piece of equipment.
Ground Fault
What you noticeA GFCI outlet or breaker trips near sinks, prep areas, restrooms or outdoor outlets.
How we fix itFind where current is leaking and repair the wiring or device.
Worn or Weak Breaker
What you noticeTrips with very little running, feels warm, or will not stay reset.
How we fix itTest the breaker and replace it if it has failed.
Common Repairs
Repairs We Handle by Type of Business
Each kind of business tends to have its own trouble spots. Here are the repairs we see most in each one.
Retail Shops
- Display and track lighting that stopped working
- Dead outlets at registers and displays
- Circuits for signs that keep tripping
Restaurants
- Kitchen equipment that keeps losing power
- GFCI outlets tripping near sinks and prep areas
- Dining room and kitchen lights that fail
Rentals and Common Areas
- Hallway and stairwell lights that are out
- Outdoor and building lights that fail
- Dead outlets reported by tenants
Plan Ahead
Repair It or Upgrade It?
Most problems only need a repair. Some keep coming back because the circuit or panel can no longer keep up. We tell you which one you are dealing with.
When a Repair Is Enough
- A single outlet, switch or fixture failed
- A loose connection or worn part caused the problem
- The circuit worked fine for years until now
When the Circuit or Panel Needs More
- Breakers trip whenever certain equipment runs together
- You are adding equipment the circuit was never sized for
- The panel has no free spaces, or the wiring is old and damaged
Repair Costs
What Affects the Cost of a Commercial Repair
Every repair is priced after we find the cause. These four things make the biggest difference to the cost of commercial electrical repair in Durham, NC.
You get the price before work starts. Nights and weekends cost the same as a weekday.
Get a Free Estimate- Time to Find the Fault
- A loose wire in one outlet is quick to find. A problem that comes and goes takes longer to track down.
- Access
- Work above drop ceilings, inside finished walls or high over a sales floor takes more time and equipment.
- Parts
- Breakers, outlets and fixture parts vary in price, and some older parts are harder to find.
- Size of the Problem
- One circuit is a smaller job than a problem that affects a whole floor or panel.
Service Area
Commercial Electrical Repairs in Durham and the Triangle
We are based in Durham and repair electrical problems for businesses across the Triangle. Call to check if we serve your area.
Neighborhoods We Serve
View All Service AreasFAQ
Commercial Electrical Repair FAQs
Tell us what stopped working and when it started. We will help you work out the next step.
Call (984) 271-2113How fast can you get to my business?
For urgent problems, we are usually on site in 40 to 50 minutes, any time of day. For repairs that can wait, we set a time that works around your hours.
Do you give a price before you start the repair?
Yes. Once we find the cause, we explain what failed and what the repair costs. Nothing is fixed until you say yes.
Can you repair things without shutting down the whole building?
Usually, yes. Most repairs only need power off to one circuit. If a larger shutoff is needed, we plan it with you ahead of time.
Do you charge more for after-hours repairs?
No. A repair at night or on a weekend costs the same as one on a weekday.
Do you work with landlords and property managers?
Yes. We do repairs for both tenants and property owners. Tell us who approves the work, and we will make sure the price goes to the right person.
Do you repair commercial light fixtures?
Yes. We find out whether the fixture, the switch or the circuit is the problem and fix it. If an old fixture is not worth repairing, we can talk about a replacement.